Guitar Effect Pedals
_______________
Western Diamondback Rattlesnake covered Pedal


Matching guitar with rattlesnake skin
with matching EMG pickups
Man this took a long time to do!!!

I like the tail stripes best!

Matching headstock
_____________________________________
"Aged" Oak enclosure


High Gain Distortion
Soldano, Mesa, 5150 style circuit with Bass, Treble , Mic and Presence controls.
Antiqued Oak enclosure finished with dissolved 78rpm records and shellac
Sound samples on the sound clip page below
_________________________________________________________

Lovetone "Brown Source" clone
125 year sold chestnut wood floorbeam enclosure.
Sound samples on the sound clip page below

The "Skyripper" fuzz in a quatersawn Oak enclosure
Sound samples on the sound clip page below
______________________________________________________

Highly figured Bubinga and Sapele wood 5532 distortion and wah filter.
Listen to samples of "5532 distortion" and manual "Deluxe wah" below.
John, I had typed a small novel describing my experience so far with the dist/filter
pedal..
about three hours of use. in lieu of the novel I'll just say that you
did a fantastic job on
this project! This pedal will be with me till the end,
I can't get it to sound shitty.
This smokes the keeley, the fulltone, the mesa
v-twin, the analogman ts-9. none of those have the
character, bite,
versatility and definition of this pedal. I loved the audio samples on your
site,
but I knew I wanted something to make mine a different beast...
your
decision to add the wah filter section was the blockbuster! that added infinite
possibilities.
Just thru the twin reverb and the jc-120 split in
stereo I'm amazed, not because I have this new pedal
and I'm in the honeymoon
phase with it, but because I have been enjoying the shit out of it for 3 hours
and I can close the book on this area of my tone.
I
think people would buy this pedal if they knew it existed.
This thing sounds better than the shit they
sell for $300.00 and up,
including the $300.00 and up shit that belongs to
me. I'm proud to own one...
I'm gonna take it to guitar center and test it out
on some amps.
Fantastic!!
-Joe Lamattina Chandler Arizona
____________________________________________
Clone of the
Maestro RM-1 Ring Modulator
70's vintage ring modulator with controls for:
High and Low frequency oscillator
Continuously Variable Frequency selection
Modulation amount/Effect amount
Input volume


Sound samples
1
2
3
4
5
6
_________________________________________
State Variable Filter

Snake skin covered version!
John, You are a sick sick man...or a genius, I haven't decided yet. Great job on the
snake skin, looks killer!
I was in Tucson, about 100 miles from home when I opened
it, got home and hooked it up with the distortion pedal and then into the
solid
state Roland jc-120 because I was too impatient to wait for the tubes to warm
up, and I'm floored! right out of
the box it screams.
It sound mean as hell. I love the woof you get when you move the
pedal, I have a lot of good shit dude,
but I have never been this satisfied with
something right out of the box as I have been with these two badass creations,
they make me want to play. this shit breathes. You my friend are a bad mother
f!@%er!
-Joe Lamattina AZ
___________________________

Controls for High pass, Band/Mid Pass, Low Pass and Resonance
Selectable Frequency sweep, manual or Foot controlled.
The unit above was made foot controllable but a more compact manual filter
pedal can be made into a smalled size box.
Sounds samples:
Recorded with a strat through the 5532 distortion into the Filter pedal and then into a Fender twin reverb.
Distorted Wah
Clean wah
Manual Filter sweeps
More Manual filter sweeps
______________________________________________
ABS Plastic Pedals
 |
 |
The above pedals are both octave fuzzes
With the Neck pickup and the tone rolled off you can get a very distinct Octave up.
Recorded with a 70's strat and a semi clean amp
Sound samples:
Octave up
Octave madness!
________________________________________
Fender Blender clone

This one is a moster!
A combonation of octave, fuzz, sustain and a very transparant thick tone.
The blend control lets you blend the fuzz with the straight clean guitar signal.
Depending on your picking strength, guitar volume and tone controls you can get a number of
pseudo ring modulations and light fuzz octave tones.
Then crank it up and you can get very heavy and slugy rock tones a plenty.
________________________________________________
Colorsound Germanium
3 knob tone bender

Gets that vintage fuzz sound for sure.
Smooth and Fuzzy
Sound Sample:
A couple different tones
____________________________________________
5532 Distortion

A simple good sounding distortion circuit.
Sound sample:
5532 Distortion
________________________________________
2 band Parametric EQ


Fully parametric EQ with Frequency, Q and Cut/boost controls.
100+ year old Chestnut floorbeam salvaged wood.
____________________________________________
The "Brownie" manual wah

This is a manual wah to use in for solos or to get the static wah wah sound.
Just dial in the wah frequency and switch it in whenever you want the mid/high boost.
Listen to the sound samples below for the deluxe wah
___________________________
Deluxe Wah

Controls for frequency (foot controlled and manual mode) Resonance, and wah sweep depth.
The Brownie and this wah are the same circuit
Sound samples:
Wah wah
Wah with oscillations
__________________________________________________________

Tweed Theremin

Tweed covered dual effect


Custom reverb/vibrato amp switch made from Apple Wood

Delay pedal. Stained and burnt Ash

Custom multi-pedal enclosure
Antique chestnut
"I am very pleased with my bespoke wooden enclosures.
We discussed my exact requirements prior to starting
work. The workmanship, detail and finish was top
quality"
Jim McCabe -UK
Ring modulator 100+ year old American Chestnut

Here are some of the
Wood pedal enclosures
I have for sale or to incorporate
into custom pedals.
Email me